DENON Схема DCD-1500AE free download

File name Схема DCD-1500AE.PDF

For Europe model Ver. 1 SERVICE MANUAL MODEL DCD-1500AE SUPER AUDIO CD PLAYER For purposes of improvement, specifications and design are subject to change without notice. Please use this service manual with referring to the operating instructions without fail. Some illustrations using in this service manual are slightly different from the actual set. TOKYO, JAPAN Denon Brand Company, D&M Holdings Inc. X0243 V.01 DE/CDM 0508 DCD-1500AE SAFETY PRECAUTIONS The following check should be performed for the continued protection of the customer and service technician. LEAKAGE CURRENT CHECK Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the unit is defective. LASER RADIATION Do not stare into beam or view directly with optical instruments, class 3A laser product. 2 DCD-1500AE DISASSEMBLY (Follow the procedure below in reverse order when reassembling.) 1. Top Cover (1) Remove 8 top and side screws. And remove 2 rear screws, then detach the Top cover. 2. Front Panel Ass'y (1) Detach the Loader panel Ass'y by lifting. (2) Remove 4 top screws and 2 bottom screws of Front Panel Ass'y. (3) Remove H/P BRACKET and CHASSIS screw, then detach the Front Panel Ass'y. (Refer to Fig. 1) Fig. 1 3 DCD-1500AE 3. Mechanism (1) Remove 4 screws, then detach the Mechanism. 4. Attachment of Mechanism (1) Mechanism is put on MECHA BRACKET BOTTOM. (2) ADJUST.COLLAR is put on 2 places of the front. (3) 2 front side screws are tightened. (4) 2 rear side screws are tightened. ADJUST. COLLAR MECHA BRACKET BOTTOM 5. Attachment of Mechanism Follow the procedure below. (1) 1 screw of volume side is tightened. (2) 1 screw of H/P jack side is tightened. (3) (4) 2 screws of H/P jack top is tightened. 1 3 4 2 (Note) When assembling the volume pwb and the bracket, insert thickness 1.6mm boar